Semi Automatic PCB Lead Line Type Cutting Machine with Adjustable Rail Design 0-280mm Rail Stroke Lead Wire Cutting Tool Board Circuit Foot Cutter

Parameters Base plate thickness: Approx 0.8mm - 2.5mm/0.03-0.1inch Lead wire cutting height: Appeox 1.5mm - 3mm/0.06-0.12inch Blades turning speed: 4500r/min Rail travel: 0 - 280mm/0-11.02inch Blade size: Φ200 x 70 x 3.5mm/Φ7.87*2.76*0.14inch Rated Power: 550W Power supply: AC110V, 50Hz Operation 1. Place the welded test plate on the adjusted wiping and cutting machine, and insert the guide rail along the guide rail lead-in line. 2. Push the right feed handle to push the plate forward at a constant speed 3. Repeat steps 1 and 2 to finish cutting the welding plate. Notice 1. The rotating parts need continuous lubrication. 2. Clean the cutting pin 3. If the transmission triangle belt is damaged, it needs to be replaced immediately 4. The blade should not leave the cutter head for too long. If the cutter head leaves for several days, lubricate the cutter head if necessary. Package Content #151026 A set of 110V?Semi automatic PCB foot cutting machine A set of Blade

• Base plate thickness: Approx 0.8mm - 2.5mm/0.03-0.1inch; Lead wire cutting height: Appeox 1.5mm - 3mm/0.06-0.12inch; Blades turning speed: 4500r/min; Rail travel: 0 - 280mm/0-11.02inch; Blade size: Φ200 x 70 x 3.5mm/Φ7.87*2.76*0.14inch; Rated Power: 550W
• The precision steel feed guide rail has high thickness, wear resistance, and is not easy to deform, thus prolonging the service life of the machine.
• The 3-hole blade gland adopts the triangle positioning principle. The blade is firmly fixed and not easy to loosen. Under high-speed operation conditions, the blade does not slip, the operation is stable, the cutting foot is accurate, and the safety factor is high.
• Blade speed is fast, the jitter is small and the pin is cut smoothl. Blades turning speed is 4500r/min. The key parts are grinded, the imported bearings are assembled, and the chamfering consistency is good.
• The breadboard wipe cutting machine is mainly applied in cutting the unwanted pin after the welding of parts of apparatus and this machine is assembled by parts made with exquisite craftwork.